Basic Info.
Communication Mode
Full-Duplex & Half-Duplex
Transmission Rate
10/100/1000Mbps
Specification
380*210*78CM
Product Description
SDAPO PSE3216S 250W big power IEEE802.3af/at standard 16 port poe network switch all gigabit
Description
Modern business networks are used for increasingly diverse applications - traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today's converged network often need to be supported not just in terms of data - equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
The 16 Port 10/100/1000Mbps PoE+ Switch offers advance switching controls and provides power to network devices using Ethernet cables. This scalable and cost effective solution allows a managed network to efficiently expand to previously unattainable levels.
High Performance Wire-Speed Switching
PSE3216S is a 16-port all Gigabit 16-port non-managed POE switch specially designed for security with POE function. It has the function of automatically detecting and identifying PD devices that meet the IEEE802.3af/at standard and powering them, so there is no need to go Worried about damaging private standard POE or non-POE equipment. PSE3216S is an economical choice for small business networks that use POE to deploy wireless access points (AP) and IP-based network surveillance cameras.
The PSE3216S POE switch can effectively solve the problems of anti-lock maintenance, wireless coverage, terminal equipment power acquisition, security monitoring engineering, and long engineering time, saving engineering costs to the greatest extent.
PSE3216S: 16-Port 10/100/1000Mbps PoE Switch +2 Gigabit uplink port + 2 Gigabit SFP port non-combo
1. Factory direct sales, quality assurance
2. Full interface POE power supply function port output power 30W
3. 16 Gigabit RJ45 ports + 2 Gigabit uplink ports + 2 Gigabit SFP port non-combo
4. Anti-static super stability and safety Non-burning equipment
5. 1-year warranty
6. 250W total power supply
7. Backplane bandwidth 52Gbps (non-blocking)
Port rate: 10/100/1000Mbps
POE protocol: IEEE802.3af/at
Number of POE ports: 16
Power supply power: 250W
POE pin position: 1,2+/3,6-
Maximum output power of single port: 30W
AC: 100~240VAC/50-60Hz
Features
l Up to 30W of Power on
l IEEE 802.3af /at
l Compatible With All IEEE 802.3af/at
l Safe: Low Power Devices Receive Only the Power They
Need
l Safe and Reliable Power to WLAN Access Points
l Automatic Detection and Protection of Non-standard
Ethernet Terminals
l Supports 10/100/1000 Base-T applications
l Compact Design Fits Easily in WLAN Access
l Plug-and-Play no configuration required
l Internal power supply
l Easy installation and maintenance
l Save up to 83% power with Green Technology
l complies to IEEE 802.3af PoE standard and is backward
Hardware Specification |
Copper Ports | 16 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE 802.3af/at PoE |
Uplink Ports | 2 Gigabit uplink ports |
SFP/mini-GBIC Slots | 2 1000Base-SX/LX/BX SFP interfaces |
Switch Architecture | Store-and-Forward |
Switch Fabric | 52Gbps / non-blocking |
Switch Throughput | 38.688Mpps@64 bytes |
Address Table | 8K entries |
Share Data Buffer | 4Mbytes |
Flow Control | Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
LED | System: Power ( yellow) 10/100 LINK / ACT(Green), 1000 LINK ( yellow) |
Dimension (W x D x H) | 295mm*165mm*44mm, 1U height |
Weight | 2.5 kg |
Power Requirement | 100~240V AC, 50-60 Hz |
Power Consumption / Dissipation | 250 Watts maximum |
Power over Ethernet |
PoE Standard | IEEE 802.3af/at Power over Ethernet / PSE |
PoE Power Supply Type | End-Span |
PoE Power Output | Per Port 52V DC, af:350mA . Max. 15.4 Watts at:600mA.Max.30W |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Budget | 250Watts |
PoE Ability | Number of PD @13W watts:16 Number of PD @20 watts:12 |
Standards Conformance |
Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000Base-T IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet |
Environemmental |
Operating | Working temperature: 0°-40°C Working humidity: 10%-90% non-condensing, |
Storage | Storage temperature: -40°-70° storage humidity: 5%-90% non-condensing |
Detail Images
Address:
3F, Building 5, Zone A, No. 2, Yanhe Road, Xinsheng District, Longgang Street Shenzhen City, Guangdong Province
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Security & Protection
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, QHSE
Company Introduction:
SDaPo Communication Co., Ltd. is a professional production and processing enterprise who products POE switch, poe splitter, poe module, poe cable, POE injector, POE extender full gigabit POE switches products and etc. We occupied the complete and scientific quality management system. The integrity, strength and quality has been gained lots of admire from industry. Welcome you all come to visit, guidance and business negotiation.
Sdapo company has always taken technical research and independent innovation as the motive power of development. What is more, we pay high attention to quality and integrity as well as details and actual effect. Our products are with very high quality, and have passed authentications like CE, FC, RoHS, 3C and so on. Besides, We have our own standard industrial factory of 2000 square meters, the whole sets of aging test equipments, complete producing krafts, strict quality control system, and enough stock, which ensures high stability for products and quick response to the market.